|Name:||Nitrogen Generator For Laser Cutting|
nitrogen generation unit,
nitrogen generation plant
Special nitrogen making machine for laser cutting
The pressure swing adsorption nitrogen production device uses clean compressed air as the raw material, carbon molecular sieve as the adsorbent, and uses the pressure swing adsorption principle to obtain nitrogen at room temperature. According to the difference in the adsorption amount of oxygen and nitrogen in the air on the surface of the carbon molecular sieve and the difference in the diffusion rate of oxygen and nitrogen in the carbon molecular sieve, the programmable controller is used to control the opening and closing of the programmed valve to realize the process of pressurized adsorption, decompression and desorption, complete the separation of oxygen and nitrogen, and obtain the nitrogen with required purity.
l Specially used in laser cutting, overall skid-mounted, high integration, site connection into the line cable and gas pipe, after professional debugging can be used;
l Real time starts and stops. Under normal working conditions, the initial startup time is 1h, and the second startup time is 0.5h;
l Two types of 50Nm3/h and 80Nm3/h are selected. The nitrogen production cost is low, 20-30% of the liquid nitrogen cost of laser cutting industry;
l The device is equipped with a remote monitoring system, and the device manager can monitor the operating parameters through the mobile APP and the computer WEB;
l The equipment is equipped with energy monitoring and energy saving adjustment, and can automatically adjust the system operating parameters according to the actual gas consumption within the range of 50-100%;
l The annual maintenance plan of professional equipment and regular site inspection by professional personnel ensure the long-term stable operation of nitrogen production system and eliminate the worries of users.
Contact Person: Jack Shi