|Product Name:||PSA Nitrogen Generator||Material:||Steel|
|Color:||Bright Or Customized||Nitrogen Output:||≤800Nm3/hr|
|Atmospheric Dew Point:||≤－40℃|
PSA Nitrogen Generator 800Nm3/hr,
PSA Nitrogen Generator 99.9% Purity
PSA nitrogen generator with some features to extend the service life and improve the utilization rate of the equipment
|Product name||PSA Nitrogen Generator|
|Atmospheric dew point||≤－40℃|
Working Principle Description
The raw air is compressed by the air compressor and then enters the later stage for air storage. Most of the oil, liquid water and dust adhere to the wall of the container and flow into the bottom of the water tank. They are regularly discharged from the sewer valve, and some enter the compressed air purification system with the air flow.
The air purification system is composed of an air conditioner and three filters and degreasers with different accuracy. The liquid water, oil and dust in the compressed air are roughly filtered through freezing dehumidification and filters to reduce the pressure dew point of the compressed air to 2 ~ 10, reduce the flow to 0.001ppm and filter the dust to 0.01M, so that it can enter the feed gas of PSA denitrifier. The purified air enters two adsorption towers respectively through two roads, and is adsorbed and desorbed alternately by automatically switching the pneumatic valve of the nitrogen machine. In this process, most of the nitrogen in the air is separated from a small amount of oxygen, and the oxygen rich air is discharged. Nitrogen is concentrated at the top of the tower, transported from the pipeline to the lower nitrogen storage tank, and enters the gas point through the flowmeter.
Nitrogen, commonly referred to as inert gas, is used in some inert atmospheres for metal treatment and in bulbs to prevent arcing, but it is not chemically inert. It is an essential element in animal and plant life and an integral part of many useful compounds. Nitrogen combines with many metals to form hard nitrides, which can be used as wear-resistant metals. A small amount of nitrogen in steel will inhibit grain growth at high temperature and improve the strength of some steels. It can also be used to produce a hard surface on steel. Nitrogen can be used to produce ammonia, nitric acid, nitrate, cyanide, etc; In the manufacture of explosives; Filled high temperature thermometer, incandescent bulb; Form inert material to preserve the material and use it in a drying oven or glove bag. Liquid nitrogen during food freezing; As a coolant in the laboratory.
● Nitrogen delivery ≤800Nm3/hr;
● Purity 99. 9%
● Pressure 0.5~0.8 Mpa
● Atmospheric dew point ≤－40℃
Contact Person: sales01