|Product Name:||PSA Nitrogen Generator||Material:||Steel|
|Color:||Bright Or Customized||Nitrogen Output:||≤200Nm3/hr|
|Atmospheric Dew Point:||≤－40℃|
Low Energy Consumption PSA Nitrogen Generator,
PSA Nitrogen Generator 200Nm3/hr
Wide application range and Low energy consumption of PSA nitrogen generator , meeting the requirements of different needs
|Product name||PSA Nitrogen Generator|
|Atmospheric dew point||≤－40℃|
Working Principle Description:
After compressed by the air compressor, the air enters the air storage tank after dust removal, oil removal and drying, and enters the left adsorption tower through the air inlet valve and left suction valve. The tower pressure increases, and the oxygen molecules in the compressed air are adsorbed by the carbon molecular sieve. The non adsorbed nitrogen passes through the adsorption bed and enters the nitrogen storage tank through the left suction valve and nitrogen gas production valve. This process is called left suction, The duration is tens of seconds. After the left suction process, the left adsorption tower and the right adsorption tower are connected through the upper and lower pressure equalizing valves to equalize the pressure of the two towers. This process is called pressure equalizing and lasts for 2 ~ 3 seconds. After pressure equalizing, the compressed air enters the right adsorption tower through the air inlet valve and the right suction valve, the oxygen molecules in the compressed air are adsorbed by the carbon molecular sieve, and the enriched nitrogen enters the nitrogen storage tank through the right suction valve and the nitrogen gas production valve. This process is called right suction and lasts for tens of seconds. At the same time, the oxygen adsorbed by the carbon molecular sieve in the left adsorption tower is depressurized and released back to the atmosphere through the left exhaust valve. This process is called desorption. On the contrary, when the left tower adsorbs, the right tower is also desorbing. In order to completely discharge the oxygen released by Depressurization in the molecular sieve into the atmosphere, nitrogen purges the desorption tower through a normally open back purge valve to blow the oxygen in the tower out of the adsorption tower. This process is called blowback, which is carried out simultaneously with desorption. After the right suction, enter the pressure equalizing process, and then switch to the left suction process, and continue the cycle.
Nitrogen, commonly referred to as inert gas, protective gas in metal heat treatment process, gas for chemical industry production and nitrogen filling and purification of various storage tanks and pipelines, gas for production of rubber and plastic products, oxygen removal and fresh-keeping packaging in food industry, purification and covering gas in beverage industry, nitrogen filling and oxygen removal of nitrogen filled packaging and containers in pharmaceutical industry, protective gas in electronic components and semiconductor production process in electronic industry, etc.
● Nitrogen delivery ≤200Nm3/hr;
● Purity 99.999%
● Pressure 0.5~0.8 Mpa
● Atmospheric dew point ≤－40℃
Contact Person: sales01