|Pressure:||0.3-0.4Mpa||Atmospheric Dew Point:||≤－60℃|
industrial oxygen concentrator,
oxygen gas production plant
Industrial PSA Oxygen Generator used in petrochemical industry
Working principle of industrial oxygen generator:
Pressure swing adsorption (PSA) method is a new oxygen technology developed rapidly in 1970s. It is the air as raw material, using a highly efficient, highly selective solid adsorbent - molecular sieve to nitrogen and oxygen selective adsorption, the air nitrogen and oxygen separation. Both nitrogen and oxygen have quadrupole moment, but the quadrupole moment of nitrogen (0.31 A u65289X is much larger than that of oxygen (0.10 A u65289X), so the adsorption capacity of nitrogen on zeolite molecular sieve is stronger than that of oxygen (the interaction between nitrogen and ions on molecular sieve surface is stronger). Therefore, when air passes through the adsorption bed equipped with zeolite molecular sieve adsorbent under pressure, nitrogen is absorbed by the molecular sieve. Due to less adsorption of oxygen, it is enriched in the gas phase and flows out of the adsorption bed, so that oxygen and nitrogen are separated to obtain oxygen. When the molecular sieve adsorbs nitrogen to near saturation, stop the air and reduce the pressure of the adsorption bed, the nitrogen adsorbed by the molecular sieve can be desorbed, and the molecular sieve is regenerated and reused. Oxygen can be produced continuously by switching between two or more adsorption beds. The boiling points of argon and oxygen are close to each other. Therefore, pressure converter adsorption oxygen plant can only obtain oxygen with a concentration of 90%~95% (the limit concentration of oxygen is 95.6%, and the rest is argon), which is also called oxygen enrichment when compared with the concentration of 99.5% or more in cryogenic air separation plant. The whole system consists of the following components: compressed air purification module, air storage tank, oxygen and nitrogen separation device, oxygen buffer tank.
Technical features of PSA industrial oxygen generator:
Oxygen-enriched combustion, industrial oxygen generator can be widely used in petrochemical industry, electric furnace steelmaking, papermaking, glass production, making ozone, aquaculture, sewage treatment, aerospace and other industries and fields, for the different requirements of different users of different industries use of oxygen, since provide personalized, specialized oxygen equipment, fully meet the requirements of different users of gas.
PSA industrial oxygen generator system flow
Technical characteristics of pure oxygen outlet
Atmospheric dew point:--60℃(Under normal pressure)
Temperature: normal temperature
Date of delivery:75 days after receiving deposit,
Monthly output:60 sets/month
Payment term: 30% deposit against the signed PI,70% balance should be paid before shipment.
After Sales:Factory site installation and debugging qualified acceptance
Contact Person: Jack Shi